Pinch Press Assembly Replacement - Sony GY-2120WD Maintenance Manual

3-6. Drum Exit Side Block

3-6-3. Pinch Press assembly Replacement

Outline
Replacement
1. Disconnect the Connector (CN854/PD-35 Board)
2. Remove the Pinch Press Assembly
3. Install the Pinch Press Assembly
4. Connect the Connector (CN854/PD-35 Board)
Adjustment after Replacement
5. Confirm the Pinch Solenoid Operation (SV18: Pinch Roller Solenoid Check)
(Refer to Section 6-2.)
6. Adjust the Pinch Press Clearance (Refer to Section 4-8.)
Preparation
1. Turn the power off.
2. Remove the upper lid. (Refer to Section 1-1-1.)
3. Remove the plate MD. (Refer to Section 1-1-1.)
4. Remove the cassette compartment. (Refer to Section 1-1-2.)
3-68
GY-2120WD/WS