Table of Contents
Advertisement
6-2. Command Description
c) BT bit Ignore Mode Setting (Service setting command No. 24)
Enter "24" as a command and press the ENTER key.
Enter 0 or 1 to set the mode of BT Bit Ignore and press the ENTER key.
SERV => 24
BT Bit Ignore Mode (default OFF) = Check [ON]
[0:OFF/other(digit):ON] => 0
SERV =>
d) REW bit Mode Setting (Service setting command No. 25)
Enter "25" as a command and press the ENTER key.
Enter 0 or 1 to set the mode of REW bit Mode and press the ENTER key.
SERV => 25
Report Early Warning Mode (default OFF) = REW [OFF]
[0:OFF/other(digit):ON] => 1
SERV =>
e) PetaServe Mode Setting (Service setting command No. 81)
Enter "81" as a command and press the ENTER key.
Enter 0 or 1 to set the mode of ModePetaServe Mode, and press the ENTER key.
SERV => 81
PetaServe Mode (default OFF) = OFF
[0:OFF/other(digit):ON] => 1
SERV =>
6-54
GY-2120WD/WS
Advertisement
Table of Contents
Troubleshooting
