Table of Contents
Advertisement
b) Display of Hours Meter (Self-diagnosis command No. 4)
Enter "4" as a command number and press the ENTER key.
The information of an hours meter is displayed as shown below. These information items are used
for maintenance of the GY-2120.
DIAGNOSTIC=>4
########[ HOURS METER DISPLAY ]####################################
|Operation | Drum-1
|
[hours]|
[hours]|
+----------+----------+----------+----------+----------+----------+
| 00001020 | 00000705 | 00000023 | 00000000 | 00000511 | 00000068 |
+----------+----------+----------+----------+----------+----------+
DIAGNOSTIC=>
Description of display
Operation : Sum of energied time
Drum-1
: Sum of drum rotating time (1) (Resettable)
This is a meter for periodic maintenance of the GY-2120. The meter can be reset by the
GY-2120.
Drum-2
: Sum of drum rotating time (2)
This is a meter for periodic cleaning of the GY-2120. The meter is automatically reset
when the GY-2120 by using the cleaning tape.
Drum-3
: Unassigned
Tape run : Sum of tape running time (Resettable)
This is a meter for periodic maintenance of the GY-2120. The meter can be reset by the
GY-2120.
Threading : Sum of threading (Resettable)
This is a meter for periodic maintenance of the GY-2120. The meter can be reset by the
GY-2120.
GY-2120WD/WS
| Drum-2
| Drum-3
| Tape run |Threading |
[hours]|
[hours]|
[hours]|
[times]|
6-2. Command Description
6-9
Advertisement
Table of Contents
Troubleshooting
