Brake Lining Replacement - Sony GY-2120WD Maintenance Manual

3-2-2. Brake Lining Replacement

Outline
Replacement
1. Remove the Reel Table Assembly (Refer to step 1 in Section 3-2-1.)
2. Remove the Brake Assembly
3. Remove the Brake Lining
4. Install the Brake Lining
5. Install the Brake Assembly
6. Install the Reel Table Assembly (Refer to step 2 in Section 3-2-1.)
Adjustment after Replacement
7. Confirm the Reel Table Height (Refer to Section 4-4.)
8. Confirm the Reel Brake Clearance (Refer to Section 4-5.)
9. Confirm the Reel Brake Release Amount (Refer to Section 4-6.)
Note
How to replace the brake lining assembly is the same on the supply and take-up
sides.
Tools
. L-shaped wrench (1.5 mm): 7-700-736-05
. Cleaning cloth:
. Cleaning fluid:
Preparation
1. Turn the power off.
2. Remove the upper lid. (Refer to Section 1-1-1.)
3. Remove the plate MD. (Refer to Section 1-1-1.)
4. Remove the cassette compartment. (Refer to Section 1-1-2.)
GY-2120WD/WS
3-184-527-01
9-919-573-01
3-2. Reel Block
3-11