Sony GY-2120WD Maintenance Manual page 324

6-2. Description of Commands
SV0D
Cassette Switch Check (Servo check command)
Function: Displays the state of a cassette tab sensor and REC inhibit sensor (switch). For the position
Operation: (1) Enter command.
Example:
------>sv0d
Servo Check [Input Check]
Cassette Switch Check
[KEY] CTRL-C=EXIT
1:Cassette ID-1 2:Cassette ID-2
3:Cassette ID-3 4:Cassette ID-4
5:Cassette ID-5 6:Cassette ID-6
7:S REC-INHI
Manual Check Start
7
Exiting...
------>_
1 When only the cassette ID-1 sensor is pressed
SW 87654321
2 When only the cassette ID-2 sensor is pressed
SW 87654321
3 When only the cassette ID-3 sensor is pressed
SW 87654321
4 When only the cassette ID-4 sensor is pressed
SW 87654321
6-100
of each sensor (switch), refer to the drawing on the next page.
* A cassette tape is automatically ejected when it has been inserted into this unit in this case.
(2) Press each sensor (switch) with fingers. At that time, confirm that "0" under the
corresponding switch number on the screen changes to "1".
Moreover, confirm that "1" returns to "0" when each sensor (switch) is released from
fingers. For NG, refer to the next page.
(3) To terminate a check, press the CTRL and C keys simultaneously.
8:L REC-INHI
1 2 3 8
4 5 SW 87654321
6 00000000
00000001
00000010
00000100
00001000
5 When only the cassette ID-5 sensor is pressed
SW 87654321
00010000
6 When only the cassette ID-6 sensor is pressed
SW 87654321
00100000
7 When only the S cassette REC inhibit switch
is pressed
SW 87654321
01000000
8 When only the L cassette REC inhibit switch
is pressed
SW 87654321
10000000
GY-2120WD/WS