Table of Contents
Advertisement
6-2-3. Download Mode
This mode is used to download the firmware of the GY-2120.
Normally, downloading is carried out by a special tool. (Refer to Section 1-13.)
The download mode is activated when three characters "FDL" are entered from the PC in a capital letter.
Message "DOWNLOAD=>" is then displayed as prompt. Entered a command number (or command)
after this prompt and press the ENTER key. The command function is executed at that time.
Enter "QUIT" after this prompt and press the ENTER key. The download mode is then terminated.
n
The download mode cannot be activated from another mode. Terminate another mode, then enter "FDL".
Help command
In the download mode, there is a help command that displays the function list in this mode. To execute
this help command, enter a command and press the ENTER key.
DOWNLOAD=>help
+===[ FIRMWARE DOWNLOAD ]====================================================+
|
| quit: Quit Tool
|
| 1: SCSI CPU
2: SYS CPU
|
|
+============================================================================+
DOWNLOAD=>
Function List Display in Download Mode using Help Command
GY-2120WD/WS
help: display help Menu
3: SV CPU
4: IF CPU
Coryright (c) 1995 1998, SONY Corp. |
|
|
|
99: Download Tape
|
|
6-2. Command Description
6-43
Advertisement
Table of Contents
Troubleshooting
