Table of Contents
Advertisement
HRR
Hours Meter Reset
Function: Resets the hours meter "Drum Run-1 Hours (res) and Drum Run-2 Hours (res)" or "Tape
Operation: (1) Enter command.
Examples:
. For Drum Run Hours (res)
------>hrr
Hours Meter Reset
[Drum Run Hours (res)] = 1
[Tape Run Hours (res)] = 2
[Thread Counter (res)] = 3
[Cleaning Tape
[Invalid Clean
Select Reset Meter (1-5)? 1
[Drum Run Hours (res)]
Are you Ready (y/n)? Yes
Reset [Drum Run Hours (res)]
------>
GY-2120WD/WS
Run Hours (res)", Thread Counter (res)", "Cleaning Tape (res)", and "Invalid Clean (res)".
n
The reset numerical value cannot be returned to the former value.
Resets the Drum Run-1 Hours (res) and Drum Run-2 Hours (res) simultaneously as a Drum
Run Hours (res).
(2) To select the item to be reset, enter the number.
Enter 1 and press the ENTER key to be reset Drum Run Hours (res).
Enter 2 and press the ENTER key to be reset Tape Run Hours (res).
Enter 3 and press the ENTER key to be reset Thread Counter (res).
Enter 4 and press the ENTER key to be reset Cleaning Tape (res).
Enter 5 and press the ENTER key to be resetInvalid Clean (res).
(3) Press the Y key to initiate reset.
*
To stop the execution, press the N key.
(res)] = 4
(res)] = 5
. For Tape Run Hours (res)
------>hrr
Hours Meter Reset
[Drum Run Hours (res)] = 1
[Tape Run Hours (res)] = 2
[Thread Counter (res)] = 3
[Cleaning Tape
(res)] = 4
[Invalid Clean
(res)] = 5
Select Reset Meter (1-5)? 2
[Tape Run Hours (res)]
Are you Ready (y/n)? Yes
Reset [Tape Run Hours (res)]
------>
6-2. Description of Commands
6-83
Advertisement
Table of Contents
Troubleshooting
