Sony GY-2120WD Maintenance Manual page 218

5-8. Time Code Level Adjustment in Rev Mode
Check
4. Turn the Power On
5. Play Back the Alignment Tape
Activate the remo. exe software, and play back
the YR2-1. (FWD mode)
6. Check the Time Code Output Level
Check the time code output level A.
7. Put the Unit into S-1 Mode
8. Check the Time Code Output Level
Check that the time code output level B satisfies
specification 1.
If the specification 1 is not satisfied, perform
steps 9 and later.
5-32
* Alignment tape: YR2-1
FWD
LTC
ANA
A > 5 V p-p
Spec.1: B x 100 > 70%
Time Code Level Check in REV Mode
S-1
A
A
GY-2120WD/WS
B