Table of Contents
Advertisement
e) RAM Check (Self-diagnosis command No. 16)
Enter "16" as a command number and press the ENTER key.
The sum of RAMs in a SCSI CPU block is checked automatically.
DIAGNOSTIC=>16
-------[ RAM Check(SCSI CPU) ]-------
Start
DIAGNOSTIC=>_
In case that the check succeeds;
Message "OK" is displayed.
In case that the check fails;
Message "ERROR!!(error count:xxxxxxxx)" is displayed.
"xxxxxxxx" indicates the number of error words.
GY-2120WD/WS
OK
6-2. Command Description
6-13
Advertisement
Table of Contents
Troubleshooting
