Sony GY-2120WD Maintenance Manual page 142

3-6. Drum Exit Side Block
Removal
1. Remove the CL Guide Rail
Refer to step 4 in Section 3-5-3.
2. Disconnect the Connector
Disconnect a connector on the CTL/TC head
CTL/TC head assembly
board.
Screw (PSW3 x 8)
Screw (PSW3 x 8)
Connector
3. Remove the CTL/TC Head Assembly
Remove the two screws, then remove the CTL/
TC head assembly from the unit.
c
Be careful not to touch the drum (especially
rotary heads). Also, take care not to damage the
peripheral tape guides.
Chassis
Remove the CTL/TC Head Assembly
3-62
GY-2120WD/WS