Sony GY-2120WD Maintenance Manual page 403

n
In menu Nos. 101 (RF PB all adjust), 229 (SAT function check) and 105 (RF REC all adjust), a tape is
used for adjustment.
1) For menu No. 101 and 229
Alignment tape YR5-1 is used.
Select menu No. 101 (229) and press the RECOVER button for activation. "Insert YR5 Tape" then
appears on the LCD display. The adjustment operation is automatically initiated when alignment
tape YR5-1 is inserted while this message is displayed.
2) For menu No. 105
A tape on which adjustment data can be recorded is used. (Do not use a tape that is used for ordinary
data recording.)
Select menu No. 105 and press the RECOVER button for activation. "Insert Blnk Tape" then
appears on the LCD display. The adjustment operation is automatically initiated when a tape is
inserted while this message is displayed.
3) For menu Nos. 210 and 211
Alignment tape YR2-1 is used. Message "Insert YR2 Tape" appears on the LCD display when menu No. 210 (211) is
selected and when the RECOVER button is pressed for activation. The adjustment is automatically started if alignment
tape YR2-1 is inserted when this message is displayed.
4) For menu No. 300
Alignment tapes YR2-1 and YR5-1, and a blank tape are used. The message below appears on the LCD display during
execution when menu No. 300 is selected and when the RECOVER button is pressed for activation. In this case, insert
the corresponding alignment tape.
LCD display
"Insert YR2 Tape"
"Insert YR5 Tape"
"Insert Blnk Tape"
GY-2120WD/WS
Corresponding tape
Alignment tape YR2-1
Alignment tape YR5-1
Blank tape
6-3. Error Processing
6-179