Section 3 Test Mode; Setting The Test Mode; Releasing The Test Mode - Sony ICD-LX30 Service Manual

ICD-LX30
Setting the test mode allows you to perform various checks and
examinations on this unit.

1. SETTING THE TEST MODE

Setting method:
1. Slide the [POWER] switch to turn the power on.
2. While pressing the [FF/ ] and [VOL –] keys, slide the [HOLD]
M
switch.
3. The test mode menu is displayed, and enter the test mode. Re-
lease the [FF/ ] and [VOL –] keys.
M
Example of Display
<SERVICE MENU>
ICD-LX30/E
0.09.00

2. RELEASING THE TEST MODE

Remove battery.
3. CONFIGURATION OF THE TEST MODE
TEST MODE
While pressing the [FF/
slide the [HOLD] switch.
Initial state of test mode
Release the [FF/
SERVICE MENU
VERSION
KEY CHECK
AUDIO LOOP
SIN
BEEP
[ F R / ] key
m LCD CONT
LCD PATTERN
J
RTC TEST
BATT A/D
ZLOAD
LOW DET
VBUS
DC-IN
j KEY COUNT
SLEEP
BATT LIFE
[ F F / ] key
M
WRITER VER
CHG LOG
MENU INIT
SERVICE MENU
Remove battery.
End of TEST MODE
8
SECTION 3
TEST MODE
Destination
Model name
Firmware version
] and [VOL –] keys,
M
] and [VOL –] keys.
M
Determine
using
[ P L AY/ ENTER/ ]
N
key
k
K
Return using
[ STOP / ] key
x
4-1. VERSION
Model name, destination, fi rmware version, IPL2 version, CPU
version, initial language, charge function, card function, radio
function, serial fl ash IC maker code and serial fl ash IC capacity
can be confi rmed in this mode.
Procedure:
1. Enter the test mode.
2. Press the [FF/ ] or [FR/
M m
and press the [PLAY/ENTER/
3. Model name, destination, fi rmware version, IPL2 version and
CPU version are displayed (page 1/2 of LCD display). Press
the [FF/ ] or [FR/ ] keys, initial language, charge func-
M m
tion, card function, radio function, serial fl ash IC maker code
and serial fl ash IC capacity are displayed (page 2/2 of LCD
display).
Example of Display (page 1/2)
<VERSION>
ICD-LX30/E
MAINFW:0.09.00
IPL2FW:0.09.00
LSI 4252
Example of Display (page 2/2)
<VERSION>
L:02 C0M1R0
FD:15 FM:04
Serial flash IC
capacity
Charge function
Serial flash IC
maker code
C/M/R : 1 = function exists
0 = function non-exists
Releasing method:
Press the [STOP/ ] key, return to test mode menu.
x
] keys to select the "VERSION",
] key.
N
Model name/Destination
Firmware version
IPL2 version
CPU version
Initial language
Radio function
Card function