Capture A Tsma6 Image (Tsma6 Image Stick) - R&S TSMA6 User Manual

®
R&S TSMA6

7.6.3 Capture a TSMA6 Image (TSMA6 Image Stick)

The capture of the image (partitions are GRUB, SSYTEM, DATA, BACKUP) takes around
15 minutes with USB 3.0 stick and even longer with USB 2.0 stick.
As a prerequisite, a user backup must exist on the master device (see
"Backup",
1. Connect the prepared TSMA6 Image Stick (see
tents on the USB Stick (Image
R&S TSMA6.
2. Reboot the R&S TSMA6. The system will boot from the TSMA6 Image Stick.
Figure 7-5: Boot TSMA6 Image Stick
3. In the TSMA6 Image Stick menu, click "Capture Image".
User Manual 4900.8057.02 ─ 01
on page 47).
Chapter 7.6.1.2, "Copy File Con-
Stick)", on page 52) to an USB 3.0 port of the
Update and Restore
Master Image
Chapter 7.5.1,
53