Prepare A Tsma6 Image Stick / Tsma6 Recovery Stick; Usb Stick Preparation - R&S TSMA6 User Manual

®
R&S TSMA6
Figure 7-1: TSMA6 Master Image - General Overview

7.6.1 Prepare a TSMA6 Image Stick / TSMA6 Recovery Stick

The following steps must be done only once.
To create a TSMA6 Image Stick you need the following:
●
USB 3.0 stick (minimum 16 GB memory space)
●
ImageStick_<version>.zip
●
PC with MS Windows 7 or higher operating system
To create a TSMA6 Recovery Stick you need the following:
●
USB 3.0 stick (minimum 16 GB memory space)
●
Recovery_<version>.zip
●
PC with MS Windows 7 or higher operating system
The ImageStick_<version>.zip and Recovery_<version>.zip can be down-
loaded from https://www.rohde-schwarz.com/software/tsma6/.
7.6.1.1

USB Stick Preparation

In order to get a TSMA6 Image Stick / TSMA6 Recovery Stick out of a USB stick, the
stick has to be formatted and made bootable.
Format the USB stick
1. Plug the USB stick into the USB port the PC.
User Manual 4900.8057.02 ─ 01
Update and Restore
Master Image
49