Options (Nestor, Tsma6, Romes); Installation Of Nestor Options; Installation Of Tsma6 Options; Installation Of Romes Options - R&S TSMA6 User Manual

®
R&S TSMA6
QualiPoc Remote Installation
For details about the remote installation procedure, see
lation",
QualiPoc Web-GUI Installation
For details about the Web-GUI installation procedure, see
Installation",

7.4 Options (NESTOR, TSMA6, ROMES)

The device must be in the PC Mode. Check it via the Web-GUI ("Overview" > "Mode of
Operation").
To change the operation mode, see

7.4.1 Installation of NESTOR Options

In order to install R&S NESTOR options, perform the following steps.
1. Start the Web-GUI of the R&S TSMA6.
2. Navigate to "Options" > "Install" Tab (see
3. Add the license key code of a specific NESTOR option in the field "Install NESTOR
Options" manually and click "Install".

7.4.2 Installation of TSMA6 Options

In order to install TSMA6 scanner options, perform the followings steps.
1. Start the Web-GUI of the R&S TSMA6.
2. Navigate to "Options" > "Install" Tab (see
3. Add the license key code of a specific scanner option in the field "Install Scanner
Options" manually and click "Install".
4. Alternatively, you can install a scanner option by selecting a license xml file and
clicking "Install XML file."

7.4.3 Installation of ROMES Options

In order to install a R&S ROMES option file, perform the following steps.
User Manual 4900.8057.02 ─ 01
on page 40.
on page 39.
Options (NESTOR, TSMA6, ROMES)
Chapter 7.1.2, "Remote Instal-
Chapter 7.1.1.1, "Web-GUI
"Mode of Operation" on page 74).
"Install NESTOR Options"
"Install Scanner Options"
Update and Restore
on page 81).
on page 81)
46