Connecting Power Supply; Connecting To A Vehicle Dc Power Supply - R&S TSMA6 Getting Started

®
R&S TSMA6
3. Connect mouse and keyboard to the USB 2.0 ports (see
a monitor to the appropriate monitor port (HDMI, USB-C)) (see
13, 9) if you want to use local operation. (optional)
4. Connect a LAN cable to the LAN port if you want to use the R&S TSMA6 via
Remote Desktop or as distributed system (optional). (See
5. OPTIONAL: Connect external devices/storage devices and test mobile
phones to USB 2.0 / USB 3.0 / USB-C ports (see
4.3

Connecting Power Supply

This section describes how to connect the R&S TSMA6 to a power supply unit.
4.3.1

Connecting to a Vehicle DC Power Supply

For 12V Vehicle DC Supply Only
The R&S TSMA6 is to be used with a 12 V vehicle power supply only.
Use the accessory DC cable with cigarette lighter adapter to power the
R&S TSMA6 from the vehicle power supply. Connect the 7-pin connector to DC
IN.
Connecting a proprietary power supply
► To use a proprietary DC supply with the R&S TSMA6 power cable, demount
the cigarette lighter adapter from the supplied power cable and connect the
open ends of the cable to the proprietary power supply. Be sure to respect the
correct polarity (see
Getting Started 4900.8040.02 ─ 07
Figure 4-1).
Preparing for Use
Connecting Power Supply
Figure 5-2
Figure 5-2
Figure 5-2
Figure 5-2 - 9, 10, 11).
- 11) and
-
- 12.)
12