Gsm Rssi Scan; Gsm Preferences - R&S TSMA6 Series User Manual

®
R&S TSMA6
The following scan types are available:
●

GSM RSSI Scan

Provides a GSM scan by selecting a band and radio channels
●
WCDMA Top-N Pilot Scan
Provides an UMTS scan by selecting a frequency band and the UARFCN
●
LTE Top Signal Scan
Provides an LTE scan by selecting the frequency band and the EARFCN
●
Throughput Test
Provides a throughput test for the connection using configurable buffer size
●
RF Powerscan
Provides a spectrum analysis by selecting the frequency range
The RAN technology for which a scan should be performed has to be selected. The
selection of the technologies is described in the following chapters.
B.3.2 GSM RSSI Scan
B.3.2.1

GSM Preferences

To start a GSM RSSI scan, the following steps must be performed.
1. Choose a frequency band.
The channels are set automatically to the maximum range available for the
selected band.
Figure B-5: Setting the GSM Preferences
2. If necessary, change the channels manually according to your needs. The input in
the "Channels" field can be done like following.
a) Add a single number for one specific channel.
b) Add a range of channels.
c) Add more than one single number separated by semicolon.
User Manual 4900.8057.02 ─ 06
Example: 7
Example: 1-124
Example: 2;4;7;76
Introduction to Remote ViCom Sample App
Usage
138