Omron DRT2 Series Operation Manual page 9

to IP67). Information on Slave settings, mounting and wiring methods are also provided separately for
each Slave type.
Section 7 provides information on the time required for a complete communications cycle, for an out-
put response to be made to an input, to start the system, and to send messages.
Section 8 describes error processing, periodic maintenance operations, and troubleshooting proce-
dures needed to keep the DeviceNet Network operating properly. We recommend reading through the
error processing procedures in both this manual and the operation manual for the master being used
before operation so that operating errors can be identified and corrected more quickly.
Appendix A provides lists of DeviceNet explicit messages and their basic format.
Appendix B provides information on using masters from other companies and Slave device profiles
necessary for multi-vendor applications, including information on installing EDS files.
Appendix C provides lists of standard models of DRT2-series Smart Slaves and connectable devices.
Appendix D shows the current consumptions of DRT2-series Smart Slaves.
Appendix E provides precautions for connecting two-wire DC sensors.
x