Omron DRT2 Series Operation Manual page 244

Using Another Company's Master Unit
Device Profiles of Analog Slaves
General data
Physical conformance
data
Communications data
Note The network current consumption depends on the Slave being used, as shown in the following table.
Model
DRT2-AD04 90 mA
DRT2-DA02 120 mA
Compatible DeviceNet Specifications
Vendor name
Device profile name
Manufacturer catalog number
Manufacturer revision
Network current consumption
Connector type
Physical insulation
Supported indicators
MAC ID setting
Default MAC ID
Baud rate setting
Supported baud rates
Predefined Master/Slave connection set
Dynamic connection support (UCMM)
Explicit message fragmentation support
Network current consumption
Volume I - Release 1.3
Volume II - Release 1.3
OMRON Corporation
Slaves: Generic
W404
1.01
See note.
Open plug
Yes
Module, Network
Software switch or rotary switch (software switch:
No. 64 to 99)
0
None (automatic recognition)
125 kbps, 250 kbps, and 500 kbps
Group 2 only server
No
Yes
Appendix B
Vendor ID = 47
Profile number = 0
227 227