Omron DRT2 Series Operation Manual page 266

Connectable Devices
Crimp Terminals for Communications Cables
Model
AI series:
AI-0.5-8WH-B (product code:
3201369)
AI series:
AI-TWIN2×0.5-8WH (product
code: 3200933)
Screwdrivers for Connectors
Model
XW4Z-00C Special screwdriver for DeviceNet connectors
SZF-1 Special screwdriver for DeviceNet connectors
Terminating Resistors
Model
Terminal-block Terminating Resistor, 121 Ω
DRS1-T
DRS2-1 Shielded Terminating Resistor (male plug), micro-size
DRS2-2 Shielded Terminating Resistor (female socket), micro-size
DRS3-1 Shielded Terminating Resistor (male plug), mini-size
Note A Terminating Resistor can also be connected to a T-branch Tap.
T-branch Taps
Model
DCN1-1C Includes 3 connectors (When used on a trunk line, 1 branch line can be con-
nected.)
A Terminating Resistor can be connected.
DCN1-3C Includes 5 connectors (When used on a trunk line, 3 branch lines can be
connected.)
A Terminating Resistor can be connected.
T-branch Connectors
Model
DCN2-1 Shielded T-branch Connector (for 1 branch line)
Power Supply Sharing Taps
Model
1485T-P2T5-T5 Required when connecting more than one power supply.
Reverse current prevention, ground terminal provided.
DCN1-1P One-branch tap for power supply.
Use this tap when connecting a communications power supply.
Two connectors and two fuses are standard.
Note The Power Supply Sharing Taps are sold through the OMRON 24 Service Co., Ltd.
Crimper
ZA3
UD6
(product code: 1204436)
Specifications
Specifications
Specifications
Specifications
Specifications
Remarks
For single-wire insertion
For two-wire insertion (multi-drop wir-
ing)
Appendix C
Manufacturer
PHOENIX CON-
TACT
Manufacturer (Supplier)
OMRON
OMRON 24 Service Co., Ltd.
Manufacturer
OMRON
Manufacturer
OMRON
OMRON
Manufacturer
OMRON
Manufacturer
Allen-Bradley
OMRON
249