Omron DRT2 Series Operation Manual page 49

DeviceNet Remote I/O Communications
Procedure
1,2,3...
32
Example: Using 16 inputs, 8 outputs, and status information.
Address 15
CIO 3200
CIO 3300
CIO 3500
1. In the Network Configuration Window, select the Master Unit, and double-
click or click the right mouse button and select Parameter – Edit – Gener-
al, and then select the Smart Slave to be set.
2. Click the Advanced Setup Button, click the Connection Tab, and select
User Setup. Select Use Poll Connection and Use COS Connection and
then select output data, input data, and generic status for the respective
connection paths. In this example, the IN size for COS connection is set to
Section 3-2
8 outputs
:
16 inputs
:
Generic Status Flags
0