Omron DRT2 Series Operation Manual page 114

Connecting Communications Cables to Environment-resistive Slaves
Thick Cables with Connectors: Mini-size
Model
DCA1-5CN@@W5
DCN2-1
Model
DCA2-5CN@@W1
DCA2-5CN@@F1
DCA1-5CN@@H1
DCN3-11
DCN3-12
Note 1. The boxes in the model numbers indicate the cable length in 1-m units. A
cable of 0.5 m, however, is indicated as "C5."
2. Standard DeviceNet cables are used for these connections, so the cables
cannot be used in environments subject to spattering, unless measures
are taken to protect the cables.
Description
Cable with shielded connector
on both ends (male plug on
mini-size end, female socket
on micro-size end)
Shielded T-branch Connector
(for one branch line)
Description
Cable with shielded connec-
tors on both ends
Cable with shielded connector
(female socket) on one end
Cable with shielded connector
(male plug) on one end
Shielded T-branch Connector
(for one branch line)
Shielded T-branch Connector
(for one branch line)
An M12 connector is used for
the branch line.
Section 6-2
97