Omron DRT2 Series Operation Manual page 196

Analog Output Terminals
Connection, and then select Generic Status from the pull-down menu in
the Con. Path field for input.
4. Click the OK Button.
5. Click the I/O Allocation (IN) or I/O Allocation (OUT) Tab, and edit the I/O
allocations. Select the Smart Slave where the I/O allocations are to be ed-
ited and click the Edit Button to display the Edit I/O Allocate Window.
In the following setting example, analog data allocations are set in the I/O
Allocation (OUT) Tab Page. (In this example, I/O is allocated in block 1,
allocated 3202 (word CIO 3202.)
Allocate the Status Flags in the same area, setting them on the I/O Alloca-
tion (IN) Tab Page.
Section 7-4
179