Omron DRT2 Series Operation Manual page 82

This section provides the specifications and describes the components, terminal arrangements, basic procedures for wiring,
and methods for connecting cables of General-purpose Slaves. Information on Slave settings, mounting and wiring
methods are also provided separately for each Slave type.
5-1 Common Specifications for General-purpose Slaves . . . . . . . . . . . . . . . . . . .
5-1-1 Current Consumption and Weights. . . . . . . . . . . . . . . . . . . . . . . . . .
5-2 Connecting Communications Cables to General-purpose Slaves . . . . . . . . . .
5-2-1 Connecting Communications Cables . . . . . . . . . . . . . . . . . . . . . . . .
5-2-2 Connecting Communications Cables to the Nodes . . . . . . . . . . . . .
5-2-3 Mounting Terminating Resistors . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-3 Remote I/O Terminals with Transistors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-3-1 Node Address, Baud Rate, and Output Hold/Clear Settings . . . . . .
5-3-2 Increasing I/O Using an Expansion Unit . . . . . . . . . . . . . . . . . . . . .
5-3-3 Remote I/O Terminals with Transistors and 16 Inputs:
DRT2-ID16 (NPN) and DRT2-ID16-1 (PNP) . . . . . . . . . . . . . . . . .
5-3-4 Remote I/O Terminals with Transistors and 16 Outputs:
DRT2-OD16 (NPN) and DRT2-OD16-1 (PNP). . . . . . . . . . . . . . . .
5-3-5 Remote I/O Terminal Expansion Units with Transistors and 8 Inputs:
XWT-ID08 (NPN) and XWT-ID08-1 (PNP) . . . . . . . . . . . . . . . . . .
5-3-6 Remote I/O Terminal Expansion Units with Transistors and 16 Inputs:
XWT-ID16 (NPN) and XWT-ID16-1 (PNP) . . . . . . . . . . . . . . . . . .
5-3-7 Remote I/O Terminal Expansion Units with Transistors and 8 Outputs:
XWT-OD08 (NPN) and XWT-OD08-1 (PNP). . . . . . . . . . . . . . . . .
5-3-8 Remote I/O Terminal Expansion Units with Transistors and 16 Outputs:
XWT-OD16 (NPN) and XWT-OD16-1 (PNP). . . . . . . . . . . . . . . . .
5-3-9 Mounting in Control Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-3-10 Wiring the I/O Power Supply and I/O Lines . . . . . . . . . . . . . . . . . .
SECTION 5
General-purpose Slaves
66
66
67
67
69
70
71
71
73
75
77
80
83
86
88
91
91
65