Omron DRT2 Series Operation Manual page 109

Remote I/O Terminals with Transistors
Wiring the I/O Power
Supply
Wiring I/O
92
Refer to the wiring details for Slave for information on the terminal arrange-
ment at the terminal block.
Connect an I/O power supply to the Expansion Unit if required. (Refer to 5-3-2
Increasing I/O Using an Expansion Unit.)
Example:
I/O power supply for a DRT2-ID16 Remote I/O Terminal.
MS NS NODE ADDRESS
5 5
X10 X1
DRT2-ID16
REMOTE TERMINAL
Refer to the wiring details for the Slave for information on the terminal
arrangement at the terminal block and external I/O wiring.
Example:
Wiring to input 0 on a DRT2-ID16 Remote I/O Terminal.
MS NS NODE ADDRESS
5 5
X10 X1
DRT2-ID16
REMOTE TERMINAL
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
IN
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
IN
Section 5-3