Omron DRT2 Series Operation Manual page 229

DeviceNet Explicit Messages
Explicit Read/
message write
Set value Read Reads the set value for
(input) for the total ON time (unit:
Total ON s) or number of contact
Time or operations (unit: opera-
Contact tions) of the input (No.
Operation 1 to 32) specified by
Counter the Instance ID.
Write Writes the set value for
the total ON time (unit:
s) or number of contact
operations (unit: opera-
tions) of the input (No.
1 to 32) specified by
the Instance ID.
Total ON Read Reads the total ON
Time or time (unit: s) or number
Contact of contact operations
Operation (unit: operations) for
Counter the input (No. 1 to 32)
(Input) specified by the
Read Instance ID.
Total ON Reset Resets the total ON
Time or time (unit: s) or number
Contact of contact operations
Operation (unit: operations) for
Counter the input (No. 1 to 32)
(Input) specified by the
Reset Instance ID.
Monitor Read Reads the monitor sta-
Status for tus for total ON time or
Total ON number of contact
Time or operations for the input
Contact (No. 1 to 32) specified
Operation by the Instance ID.
Counter
(Input)
Read
212
Function
Service
code
0E Hex 08 Hex 01 to 20
10 Hex
0E Hex 08 Hex 01 to 20
05 Hex
0E Hex 08 Hex 01 to 20
Command
Class Instance Attribute
ID ID ID
68 Hex
Hex
08 Hex 01 to 20 68 Hex
Hex
66 Hex
Hex
08 Hex 01 to 20 66 Hex
Hex
67 Hex
Hex
Appendix A
Response
Data size
4 bytes
00000000 to
FFFFFFFF Hex
(0 to
4294967295)
4 bytes
00000000 to
FFFFFFFF
Hex
(0 to
4294967295)
4 bytes
00000000 to
FFFFFFFF Hex
(0 to
4294967295)
1 byte
00 Hex: Within
range
01 Hex: Out of
range (over the
monitor value)