9. Close the tape holder plate.
10. At the Autoslide Control window, select
to tighten the tape.
Start
Replacing the Printer Ribbon
Materials required: New print cartridge
Time: 2 minutes
Analyzer mode: Standby
To replace the print ribbon
CAUTION
Make sure all slides are processed and transferred to the output queue, before
turning off the Autoslide. Turning off the autoslide while slides are processing
can cause unreliable results and possibly damage Autoslide components.
1. Turn off the Autoslide.
2. Open the lower front cover and remove the slide rack loader to gain easy
access to the printer ribbon.
ADVIA Autoslide Slide Maker Stainer
10-45