Calibrator And Control Products - Siemens ADVIA 2120 Operator's Manual

Do not assay cold specimens!
Allow the specimen to equilibrate to room temperature before mixing.
Do not warm specimen by placing it into a 37°C water bath or incubator.
Unless otherwise stated, no special treatment of the whole blood specimen is
required. However, samples must be collected in the specified collection tube and
gently, but thoroughly mixed at the time of collection and again before sampling.

Calibrator and Control Products

CAUTION! POTENTIAL BIOHAZARD
Contains human source material. While each human serum or
plasma donor unit used in the manufacture of this product was
tested by FDA-approved methods and found nonreactive for
hepatitis B surface antigen (HBsAg), antibody to hepatitis C
(HCV), and antibody to HIV-1/2, all products manufactured using
human source material should be handled as potentially
infectious. Because no test method can offer complete assurance
that hepatitis B or C viruses, HIV, or other infectious agents are
absent, these products should be handled according to established
good laboratory practices.
Siemens supplies control and calibrator products for use with the ADVIA
2120/2120i Hematology System.
Refer to the current Price List, and the product package insert for additional
information.
ADVIA 120 TESTpoint 3-in 1 Hematology Control Abnormal 1
Product
Number
09459683 T03-4417-54
- T03-4417-01
ADVIA 120 TEST Point 3-in-1Hematology Control Abnormal 2
Product
Number
03410380 T03-4418-54
Regulatory Information
If the whole blood specimen is brought to
CAUTION:
room temperature quickly, there is a strong tendency for
the platelets to clump upon mixing.
Do not use previously frozen whole blood samples.
Freezing the blood can disrupt the cellular structure, thus
resulting in aberrant cell counts.
Symbol Contents
Hematology Control
Abnormal 1
Hematology Control
Abnormal 1
Symbol Contents
Hematology Control
Abnormal 2
Amount
(mL)
4 x 4.0 mL
4.0 mL
Amount
(mL)
4 x 4.0 mL
9-5