Processing The Samples; Creating The Workorders - Siemens ADVIA 2120 Operator's Manual

3. The background results are color-coded.
If any result is out of range, select
background count cycle. If any result is still unacceptable, perform a system
wash.

Processing the Samples

Creating the Workorders

The Order Entry window allows you to create and manage workorders at the
analyzer. You can also create workorders at the host computer.
Creating Workorders by SID#
1. At the Access menu, select
2. In the SID
3.
Optional:
from field to field.
4. Select tests.
5. Select
6. The Access dialog box appears for the next workorder.
Creating Workorders by Patient #
1. At the Access menu, select
2. In the Pat
If there is more than one workorder for this patient, they are listed.
3. Select
4. Enter sample and patient information.
5. Use the Tab key to move from field to field.
You must enter a sample ID number.
6. Select tests.
7. Select
The Access dialog box displays for the next workorder.
Creating Workorders by Patient Name
1. At the Access menu, select
2. In the Name box, enter the patient name, then select
(To view patient list, type ?, then press the Tab key.)
3. If the entered patient name already exists, you can:
Daily Routine
Green Within range
Red Out of range
# box, enter the sample ID, then select
Enter sample and patient information. Use the Tab key to move
OK to confirm the entries.
box, enter the patient number, then select
#
to make a new workorder for this patient.
Create
OK to confirm the entries.
at the Startup tab to run another
Refresh
SID# (sample ID number).
Enter
.
Pat#
.
Name
or select OK .
or select .
Enter OK
Enter or select OK .
3-5