Figure 17: Model 4048 50-Conductor Plug Mounting
Remove the bottom cover of the main
chassis while installing the Aux. I/O
Card cable to make the job easier.
Note
The connector ports used for Aux I/O inputs are optional and are
only installed when Aux I/O cards are installed. Systems without
Aux I/O cards will not have these connectors installed.
These connector ports are multipurpose connectors. Connector
functionality depends on the type of cards installed. See
for Aux I/O use.
Auxiliary I/O Card Installation (Optional)
Aux I/O outputs
See
Table 27
250-0030 + 220-0105
Move cover plate up
when the cable is
installed.
Pin #1 stripe
faces left side
Aux I/O inputs
Area of Detail
Table 27
79