ZETRON 4000 Series Installation Manual page 300

IntegratorRDPS Programming
Entering the MAP27 Talkgroup
You may associate talk group numbers between 90 to 99, or 900 to 998. Each group
number can have several aliases, but these aliases can not have the same channels assigned
to each of them. Channels are not available (grayed) if they have not yet been
programmed. See
Figure 75: Configure Talk Group Aliases Dialog Box for MAP27 Channels
Entering the SDC Talkgroup
While the SDC format shares a great deal with the iDEN format, there are limitations in its
implementation in the Series 4000 system that cause the Talkgroup Definitions window to
change a bit when SDC is selected. The important limitations are:
• The Talkgroup ID number is any number from 1 to 15 digits in length
• SDC only allows a single channel to be selected per talkgroup
• SDC only supports a single talkgroup per channel, so already used channels will be
visible but not available (grayed out)
300
Figure 75.
025-9533Y