Table of Contents
Advertisement
Wireless Interface Options
4. All External I/O and Scanning should typically be disabled on fixed location
radios. This is especially true of the System Scanning - Wide Area mode. This
should never be enabled in a fixed location radio that shall be connected to a
console system. To disable these items:
a. In the Options tab, Keypad Options menu:
b. In the Options tab, Scan Options menu, Conventional Scan Options area:
c. In the Options tab, Scan Options menu, Universal Scan Options area:
d. In the System Scan Options menu:
e. In the Options tab, External Options menu, Auxiliary Input 1:
5. Initiate programming of radio.
6. Upon completion of programming, power down the radio by removing power
7. Remove the programming cable and connect the radio to the Zetron control cables.
146
Hookswitch Disable Scan (Parameter) = OFF (Unchecked)
Ramp Wrap (Parameter) = ON (Checked)
Scan With Channel Guard (Parameter) = OFF (Unchecked)
Scan List (Parameter) = FIXED
P1 Programming (Parameter) = FIXED
P2 Programming (Parameter) = FIXED
If the Scan Add and Scan Delete buttons are to be used at
Note
the IntegratorRD console, then the above parameters cannot
be set to the FIXED parameter value (Scan List, P1
Programming, and P2 Programming). They must be
configured according to the user's application desires
instead.
Scan Type (Parameter) = ProSound/ProScan (Option 2)
Note
This option allows the radio to scan for its system (site)
control channel to ensure that the site remains active. If
'Option 1 = Disabled' is selected, then the system scanning
of the radio is completely disabled. If 'Option 3 = Wide
Area' is selected, then the radio should not be used as a fixed
location radio that gets connected to the console system.
The 'Option 3 = Wide Area' setting should only be used in
radios that are capable of roaming from site to site such as
those that are installed in vehicles would be used in this
manner. The 'Option 3 = Wide Area' setting is known to
cause problems with the system if it's used in fixed location
radios that are connecting to the system.
Keycode = Ext PTT
Control Unit = A
025-9533Y
Advertisement
Table of Contents
