Table of Contents
Advertisement
IntegratorRDPS Programming
Assigning a Radio Group Label
The Radio Group Label can be one, two, or three 6-character words that are shown on the
console screen buttons for the radio group. See
Assigning MPT 1343 Fleet Info
Through RDPS, each MAP27 Radio Group (up to 10) can be programmed with its own
MPT 1343 Fleet Info, which includes 'Prefix', 'Individual Fleet ID', 'Group Fleet ID',
'Highest Individual ID', 'Highest Group ID'.
With this information programmed, Integrator RD is able to determine which fleet a
MAP27 radio belongs to, and display its corresponding Alias text (if defined).
Figure 68: MAP27 Radio Group Definition Dialog Box
Defining MDC-1200 Radio Groups
MDC-1200 Radio groups associate similar MDC-1200 radios into a group that the console
operator can select. The Define Lists/Radio Groups/MDC-1200 Radio Groups menu
presents an entry form for assigning labels to up to 10 radio groups.
If one or more radio groups are defined, selecting the MDC-1200 Call menu button
displays labeled buttons for group selection. When the operator clicks on one of the radio
292
Note
In order for this lookup scheme to work, Integrator RD must make
an assumption. This assumption puts specific radio configuration
requirements on the installer, which is that all fleet numbering must
begin at the respective minimum MPT 1343 ID (20, 90, 200, 900)
and increment successively.
Tip
Navigate to this area from the main window in RDPS by clicking
Define Lists, Radio Groups, MDC-1200 Radio Groups.
Figure
68.
025-9533Y
Advertisement
Table of Contents
