Table of Contents
Advertisement
Console Programming System
Position Settings
To configure position settings, click Edit, Position Configuration. A dialog box will
appear, as shown in the following figure.
This number identifies which position
configuration is currently being
viewed. Click the up or down arrows
to view other position configurations.
Click the Position Layout
button to configure the
types of panels at the
position indicated.
Click a panel button to configure the
keys or spare inputs for that panel
Click a position button to copy that
position's configuration information
to the currently identified position
Click these buttons to configure
preferences for each position.
When done configuring
positions, click Done
Position
This number identifies which position configuration is currently being viewed. Any
changes you make to configuration information will only affect the identified position. To
modify the configuration information for a different position, click the up or down arrows
until you see the appropriate position number. The number can also be changed by typing
the new number and pressing Enter.
208
Tip
Provides information to help users apply techniques or procedures.
Suggests an alternative method for performing a task, or presents
an advanced method or shortcut.
Tip
It is best to configure system settings before position settings.
Some position settings, such as specific key definitions, are not
available until the system settings are configured correctly. See
System Settings
on page 200.
025-9533Y
Advertisement
Table of Contents
