ZETRON 4000 Series Installation Manual page 296

IntegratorRDPS Programming
Radio Type
EDACS
(Also used for P25)
GE-Star NYSP
MDC-1200 or
Zetron iRIM Type A
Zetron iRIM Type B
Finding and Selecting a Subscriber ID Alias
There are two ways to find and select a Subscriber ID. The simplest method is to use the
scroll bars or arrows next to the Record No. field. Use these controls to quickly or
individually browse through the list. Note that, when changing the alias number, the entry
information shown is automatically saved and a warning popup tells you to check the
number.
If the subscriber list is rather large or you need a more advanced method of finding a
subscriber ID, click Select. This opens the Select Subscriber window. In this window you
can click column headings to sort subscriber entries based on alphabetical or numerical
ordering of any of their properties. You can also perform a text search by selecting which
property you'd like to search and typing in the appropriate text in the search bar. When
you have found the ID you were looking for, select it and click OK to return to the editing
window.
296
For EDACS: 1 to 16383
For P25: 1 to 16777215
Because the valid range for P25 is longer than for EDACS, it is
possible to enter an invalid EDACS ID.
This is a special format reserved for NYSP.
Using this format requires a separate Zetron software license.
Hexadecimal value from 0001 to FFFF
For FleetSync: FFF-IIII where FFF is the fleet number (100 - 349) and
IIII is the member ID number (1000 - 4999)
For P25: DDDDDDDD where D is a digit 0 through 9 and the valid
numerical range is 00000001 through 16777215.
Note Please reference Motorola's network and radio ID specifications for
NDC to ensure that you are using the correct ID structures. Zetron
does not currently support the use of Out Of Range (OOR)
members in the IDs (transmit only). Received calls are still passed
to the console.
For iDEN, MAP27, and MDC-1200, a subscriber can be added to
more than one radio group.
Valid Ranges for Subscriber IDs
025-9533Y