ZETRON 4000 Series Installation Manual page 213

Table of Contents

Advertisement

Mute all Idle Channels
Unmute Idle Chan Upon
Monitor
Muting Signaling Tones
Mic Delay Eliminator
* The percentage entered will be rounded to the nearest multiple of three.
5. Click Done when you are finished.
ANI Decode / Display
ANI (automatic number identification) is normally used for identification of mobile
radios. ANI uses remote signaling tones that are either automatically or manually sent
when the radio is keyed. One use for ANI is as a single-button-press on the radio to call for
help.
On systems equipped with the ANI option, the ANI Decode / Display function will allow
the ANI mode and the ANI address to be set for each position.
Note
To configure ANI Decode / Display
1. Click Edit, Position Configuration.
2. Use the up and down arrows next to the Position number to select the position to
configure.
3. Click ANI Decode / Display.
The ANI Configuration dialog window opens.
When enabled, audio from channels that do not have "call" activity are
muted. This is useful for a position that has many channels, since quiescent
line noise will accumulate on the unselected speaker audio. If not enabled,
systems using Channel Check IRR will cause audio playback activated
from one console position to be heard at all positions.
When enabled, channels unmute when the CTCSS monitor function is
active.
When enabled, tone remote signaling tones from the auxiliary audio input
are muted at this position. Disable to hear the signaling tones.
The Mic Delay Eliminator puts a delay in the microphone voice signal so
that the operator's voice reaches the transmitting radio at the same time that
the carrier is activated. Enable this to prevent the lost first syllables that can
occur when transmitting over transmitter links or tone-remote control.
This function is typically disabled by default. Enable this for use with the
Tone Remote System Adapter with Audio Delay, as described in the
adapter's technical sheet (P/N 011-0347).
ANI decode is only possible from channels that have ANI enabled.
Using CPSW
213

Advertisement

Table of Contents
loading

Related Products for ZETRON 4000 Series

This manual is also suitable for:

41184115b40184217b4219

Table of Contents