Table of Contents
Advertisement
Edit Custom Calls
Note
The "Edit Custom Calls" menu item is only enabled when there is a
leading digit in the "Paging Format Configuration" dialog that has
been defined as "Custom (Plectron)". Otherwise, this menu item is
disabled and cannot be accessed to configure any data in the area.
Custom Calls defines your own custom two-tone pages for the paging format "Custom
(Plectron)". If you have assigned a leading digit to a custom paging format (see
and configure a paging format for a leading digit
custom calls here.
To configure Custom Calls
1. Click Edit, System Configuration, Edit Custom Calls.
If the Edit Custom Calls menu item is disabled, you must first assign a leading
digit to a custom paging format (see
leading digit
on page 203).
2. Type in a custom Call Number between 1 and 255 and press Enter. Alternatively,
you can select a call number by using the Up and Down arrow controls, Next and
Prev buttons, or def buttons.
Choose a Call Number based on the number to key in. For example, if the "Custom
Call" paging format has been assigned to leading digit "C" and you configure Call
Number "11", then keying "C11" on the Model 4018 or 4118 paging/DTMF
keypad would add the custom call to the paging stack.
Tip
The def buttons jump to the next or previous defined call numbers
only, thus skipping undefined call numbers.
3. If you are configuring a call number that wasn't previously defined, click Define to
make the Tone Settings editable. (If the call number was previously defined, the
Tone Settings are already editable.)
4. Enter the Frequency and Duration parameters for each tone, the Tone Gap
Duration (duration between tones 1 and 2), and the Talk Time. For an explanation
of Talk Time, see
5. If you have additional Call Numbers to configure, repeat this procedure. If you are
finished, click OK.
Tip
The Revert button will restore the settings of the current call
number only. The settings for other call numbers are not affected.
To delete custom calls
1. To delete all custom calls, click Delete All Custom Calls.
2. To delete a specific custom call:
on page 203), then you must configure
To assign and configure a paging format for a
Step 4
on 203.
Using CPSW
To assign
205
Advertisement
Table of Contents
