Table of Contents
Advertisement
Safety Summary
Warning! For your safety and the protection of the equipment, observe these
STOP
• Follow all warnings and instructions marked on the equipment or included in documentation.
• Only technically qualified service personnel are permitted to install or service the equipment.
• Be aware of and avoid contact with areas subject to high voltage or amperage. Because some
components can store dangerous charges even after power is disconnected, always discharge
components before touching.
• Never insert objects of any kind through openings in the equipment. Conductive foreign objects
could produce a short circuit that could cause fire, electrical shock, or equipment damage.
• Remove rings, watches, and other metallic objects from your body before opening equipment.
These could be electrical shock or burn hazards.
• Ensure that a proper electrostatic discharge device is used, to prevent damage to electronic
components.
• Do not attempt internal service of equipment unless another person, capable of rendering aid
and resuscitation, is present.
• Do not work near rotating fans unless absolutely necessary. Exercise caution to prevent fans
from taking in foreign objects, including hair, clothing, and loose objects.
• Use care when moving equipment, especially rack-mounted modules, which could become
unstable. Certain items may be heavy. Use proper care when lifting.
Change List for Rev T, June 2013
• Updated
Orion Dual Channel Wireless Control Card Configuration
• Updated
Radio Programming
• Updated
Wireless Dual Channel Card Configuration (P/N 950-1113)
• Updated
Figure 33
• Added
Harris Wireless Interface Module
Change List for Rev U, July 2014
• Added the options available for dual RS-422 Serial Interfaces on page
• The IntegratorRD Workstation, P/N 901-9569 is obsolete and is removed from the PC
Configuration section on page
• Change Minimum System requirements (per 011-0830_D) in
• Include Win7 setup instructions in the Windows 7 Settings section on page
Change List for Rev V, December 2015
• In System Functions, under the subheading Patch Keys, removed a reference to an obsoleted
option, the Quad Patch card, see
4
precautions when installing or servicing Zetron equipment:
on page 145 with new step.
on page 151.
on page 152
246
Patch Keys
Table 92 on page 246
on page 381
on page 133.
on page 147.
239
and
242
248
025-9533Y
Advertisement
Table of Contents
