Common Control Equipment Installation
L) Login (enter user name)
H) History log functions
P) Port configuration menu
O) ANI display option
G) Goodbye (log out)
( 2 Oct 1998 08:23:09.66) Zetron M4048 Service Port (STC1 rev 01.05E)
Enter command (? = help):
The $Version line displays the current STC code version.
History Log Functions
To access the History Log features, type H and press Enter. The following menu is
displayed.:
To view the History Log data:
Type F or R and press Enter. (Forward starts at the beginning of the log; Reverse starts
with the most recent data). A prompt asking for the beginning date appears.
Enter beginning date, as YY, YY MM, or YY MM DD (or enter '80' for all).
shows an example history file. The date is shown whenever it changes and all messages
are time-stamped.
106
Note
The Login and Goodbye options are not used in normal operation.
In case of system problems, Zetron Service employees can use
these options to access special features of the system.
F) Forward chronological review
R) Reverse chronological review
I) Include card configuration report in review
X) Exclude card configuration report from review
Note
History Log data is sent to the Logger output, so if the Logger data
is not directed to the Modem/Service port, no data can be seen at a
computer or modem connected to the Modem/Service port.
Figure 26
025-9533Y