Radio System Management Program
5. If you want to assign aliases, click in the channel name text box and change the
text. Aliases are included in reports.
6. When you are done with channel selection and aliases, click OK to save changes.
Figure 100: Select Active Channels
COM Port Settings
1. Choose the COM port for serial data (see
2. Click Options and COM Port and select the COM port to which the serial cable is
connected.
3. If the COM port is busy or not available, the program will display a warning.
Resolve the problem or choose a different COM port.
342
Note
All radio activity is recorded even if a channel is not enabled.
Enabling channels determines which channels are printed in the
report. These selections can be changed any time.
Figure
101).
025-9533Y