Feature Codes - Avaya IP Office Basic Edition Manual

1.7 Feature Codes

The following feature codes can be dialed from most phones after pressing Feature. Most of these features can also be
assigned to programmable buttons.
Feature
Do Not Disturb
258
Do Not Disturb
Cancel
258
Recall
279
Save Number
Redial
281
Last Number
Redial
267
Conference Drop
252
Privacy
277
Call Forward
238
Call Forward
Cancel
238
Account Code
Entry
228
Voice Mailbox
Transfer
291
VMS Cover
289
Caller ID Name
Display
246
Caller ID Inspect
242
Call Coverage
236
Station Lock
285
Station Unlock
287
Phone Based Administration
IP Office Basic Edition
DS Phones/ BST Phones
ETR Phones
01 85
01 #85
03 71
04 67
05 5
06 934
07 83
11 4
11 #4
12 900
14 986
15 984
16 933
17 811
20 932
21 936
22 937
Comments on this document? infodev@avaya.com
Description
This function allows the user to set the extension's do not
disturb on or off.
This function allows the user to send a recall or hook flash
signal.
This function allows the user to save the number dialed
during a call and to redial that number when idle. This can
be used when the number dialed does not answer.
This function allows the user to redial the last external
number dialed.
This function allows the user to drop a call from a
conference.
This function allows the user to turn privacy on or off. When
on, other extensions are not able to bridge into the user's
calls.
This function allows the user to redirect all their calls to
another number. Extensions with
Forwarding enabled can also forward calls externally by
112
specifying a personal speed dial
This function allows the user to enter an account code prior
to making a call or during a call.
This function allows the user to transfer their current call to
an extension's mailbox. After pressing the button, the
current call is put on hold and the user can then enter the
target extension number to indicate the mailbox required.
This function allows the user to switch use of voicemail
coverage for their extension on or off.
This function allows the user to swap the display of caller ID
name and number information on their extension.
This function allows the user to see the caller ID of a call on
another line without interrupting the current call to which
they are connected.
This function allows the user to switch call coverage for
their extension on or off. The button settings include the
extension number of the extension providing coverage.
When on, calls to the user that ring unanswered for the
user's number of coverage rings
at the call coverage extensions.
This function allows the user to lock their extension from
being used to make calls. After they press the button, they
are prompted to enter a four digit code after which the
extension is locked. If the extension is already locked,
pressing the button prompts for reentry of the four digit
code to unlock the extension.
This function can only be used by the first two extensions in
the system. This function allows the user to unlock any
extension without needing to know the code that was used
to lock that extension. When the button is pressed, the user
is prompted to enter the number of the locked extension.
- Issue 6a (Thursday, February 22, 2018)
Remote Call
as the destination.
141
then also start ringing
199
Page 52