Avaya IP Office Basic Edition Manual page 168

ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #409. The phone will display Forced Act Code List.
4. Select a list entry 01 to 99.
5. Enter up to six digits for the list entry. If the account code is five digits or less, you must press
the account code in memory. To enter a wildcard digit press HOLD.
6. Do one of the following:
·
To enter other account codes, press
·
To change the account code you just entered, press
·
To delete the account code you just entered, press
7. Press the Next Item or Previous Item button for the next or previous number entry.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
22
Next Item
Remove
Comments on this document? infodev@avaya.com
to select a different list entry and repeat Steps 5 and 6.
Remove 22 and repeat Steps 5 and 6.
22
.
- Issue 6a (Thursday, February 22, 2018)
Enter 22 to save
Page 168