Assign Line To Auto Attendant - Avaya IP Office Basic Edition Manual

4.4 Assign Line to Auto Attendant

IP Office Basic Edition 6.1 and higher and higher supports multiple (9) auto attendants. By default all lines are assigned to
the first auto attendant. The Assign Line to AA settings allows this settings to be adjusted to select a different auto
attendant.
The individual auto attendants are configured through system web management. They cannot be configured through the
phone base administration menus.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the up or down
Select.
3. Use the up or down
·
Alternatively, dial # and the
4. Use the up or down
Select.
5. At the Line: prompt, enter the desired line number 01 to 64.
6. The current setting is displayed.
7. Enter the auto attendant number 1 to 9. The default is no auto attendant.
·
Alternatively use the
default setting.
8. Use the up or down
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
·
If the system has a
2. The phone displays System Admin.
3. Dial #210. The phone displays Assign Line to AA.
4. At the Line: prompt, enter the desired line number 01 to 64.
5. The current setting is displayed.
6. Enter the auto attendant number 1 to 9. The default is no auto attendant.
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
7. Use the Next item or Previous item buttons to select another line to adjust if required.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
Phone Based Administration
IP Office Basic Edition
arrow buttons to scroll the display to System Administration. When highlighted, press
arrow buttons to scroll the display to Lines. When highlighted, press Select.
system administration
arrow buttons to scroll the display to Assign Line to AA. When highlighted, press
left or right arrow icons to toggle through the settings or Default to return to the
arrow buttons to select another line to adjust if required.
PHONE. Alternatively use the Back button to move to another menu.
system password set, it is requested. Enter the password.
114
Comments on this document? infodev@avaya.com
PHONE button to display the Admin soft key
SPEAKER,
10
code.
Feature **config (ie. Feature **266344).
- Issue 6a (Thursday, February 22, 2018)
MUTE and HEADSET
Page 80