Avaya IP Office Basic Edition Manual page 104

1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the up or down
Select.
3. Use the up or down
press Select.
·
Alternatively, dial # and the
4. Use the up or down
5. At the List Number: prompt enter 1 to 8 for the list you want to edit.
6. At the Entry: prompt enter the list entry you want to change by entering 01 to 10.
7. The current setting is displayed.
8. Enter the new number and press Enter. To enter a wildcard digit press HOLD. Press Clear to remove the
existing number.
9. Use the up or down
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
·
If the system has a
2. The phone displays System Admin.
3. Dial #404. The phone displays Disallowed Lists.
4. At the List Number prompt, enter a list number 1 to 8.
5. At the Entry prompt, select a list entry 01 to 10.
6. Enter the first telephone number. To save the telephone number in memory, press Enter. Do one of the
following:
·
To delete the telephone number you just entered, press Remove.
·
To add other telephone numbers to this list, press Next Item and repeat Steps 6 and 7.
·
To create another list, press Next Procedure + Prev Procedure and go to Step 5.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #404. The phone displays Disallowed Lists.
4. At the List Number prompt, enter a list number 1 to 8.
5. At the Entry prompt, select a list entry 01 to 10.
6. Enter the first telephone number. To save the telephone number in memory, press Enter. Do one of the
following:
·
To delete the telephone number you just entered, press Remove.
·
To add other telephone numbers to this list, press Next Item and repeat Steps 6 and 7.
·
To create another list, press Next Procedure + Prev Procedure and go to Step 5.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
arrow buttons to scroll the display to System Administration. When highlighted, press
arrow buttons to scroll the display to Restrictions/Permissions. When highlighted,
system administration
arrow buttons to scroll the display to Allowed Lists. When highlighted, press Select.
arrow buttons to scroll through the other numbers in the list.
PHONE. Alternatively use the Back button to move to another menu.
system password set, it is requested. Enter the password.
114
Comments on this document? infodev@avaya.com
PHONE button to display the Admin soft key
SPEAKER,
code.
10
Feature **config (ie. Feature **266344).
- Issue 6a (Thursday, February 22, 2018)
MUTE and HEADSET
Page 104