Override Line Ringing - Avaya IP Office Basic Edition Manual

14.7 Override Line Ringing

This option is new for IP Office Basic Edition 6.1 and higher+. For extensions where this is set, the extension's own ring
pattern settings override any
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the up or down
Select.
3. Use the up or down
4. Use the up or down
Select.
5. At the Extension: prompt enter the extension you want to edit.
6. The current setting is displayed.
7. Enter 1 or 2. The default is 2 (not active), ie. do not override the line ringing setting.
·
Alternatively use the
default setting.
8. Use the up or down
·
Exit programming by pressing
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
·
If the system has a
2. The phone displays System Admin.
3. Dial #324. The phone displays Override Line Ringing.
4. At the Extension: prompt, enter the number of the extension to be programmed.
5. Enter 1 or 2. The default is 2 (not active), ie. do not override the line ringing setting.
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
6. Press the Next Item or Previous Item button for the next or previous extension respectively.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #324. The phone displays Override Line Ringing.
4. At the Extension: prompt, enter the number of the extension to be programmed.
5. Enter 1 or 2. The default is 2 (not active), ie. do not override the line ringing setting.
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
6. Press the Next Item or Previous Item button for the next or previous extension respectively.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
line ringing pattern setting.
206
arrow buttons to scroll the display to System Administration. When highlighted, press
arrow buttons to scroll the display to Extensions. When highlighted, press Select.
arrow buttons to scroll the display to Override Line Ringing. When highlighted, press
left or right arrow icons to toggle through the settings or Default to return to the
arrow buttons to select another extension to adjust if required.
PHONE. Alternatively use the Back button to move to another menu.
PHONE. Alternatively use the Back button to move to another menu.
system password set, it is requested. Enter the password.
114
Comments on this document? infodev@avaya.com
PHONE button to display the Admin soft key
SPEAKER, MUTE and
Feature **config (ie. Feature **266344).
- Issue 6a (Thursday, February 22, 2018)
HEADSET
Page 208