Avaya IP Office Basic Edition Manual page 87

ETR 18D/ETR 34D Phone
1. At either of the first two extensions on the system, press Feature 00 followed by two presses the first intercom
or call appearance button and one press of the second intercom or call appearance button. Centralized
Programming: is shown on the display.
2. At the Extension: prompt enter the number of the extension.
3. Dial **.
4. Press the appearance buttons in the order required.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
Comments on this document? infodev@avaya.com
Line Settings: Automatic Line Selection
- Issue 6a (Thursday, February 22, 2018)
Page 87