Avaya IP Office Basic Edition Manual page 163

a. At the phone, press Feature 00.
b. Program Extension: is shown on the
display.
2. Press FEATURE and dial 700 to 719.
·
The number used above is not a fixed reference. For example, if the exception number set using 702 is
cleared, any numbers set as 703 and above are move to 702 and above.
3. The current number is shown if any.
·
To clear the current number, press the Mic/HFAI key
·
To enter a number using the normal dialing keys.
·
To enter a single digit wildcard, press the Hold key. The wildcard is shown as an X.
·
To enter a multiple digit wildcard, press the Transfer key. The wildcard is shown as an N.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
a. At either of the first two extensions on the system, press Feature
00 followed by two presses the first intercom or call appearance
button and one press of the second intercom or call appearance
button. Centralized Programming: is shown on the display.
b. At the Extension: prompt enter the number of the extension.
Comments on this document? infodev@avaya.com
Extension Settings: Do Not Disturb Exceptions
- Issue 6a (Thursday, February 22, 2018)
Page 163