Avaya IP Office Basic Edition Manual page 83

M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
·
If the system has a
2. The phone displays System Admin.
3. Dial #206. The phone displays Group Call Distrib.
4. At the Group: prompt, enter a group number 1 to 6.
5. At the Line: prompt, enter the desired line number 01 to 64.
6. Enter 1 (assigned) or 2 (not assigned). The default is 2 (not assigned).
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #206. The phone displays Group Call Distrib.
4. At the Group: prompt, enter a group number 1 to 6.
5. At the Line: prompt, enter the desired line number 01 to 64.
6. Enter 1 (assigned) or 2 (not assigned). The default is 2 (not assigned).
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
system password set, it is requested. Enter the password.
114
Comments on this document? infodev@avaya.com
Line Settings: Group Call Distribution
Feature **config (ie. Feature **266344).
- Issue 6a (Thursday, February 22, 2018)
Page 83