Vms Cover - Avaya IP Office Basic Edition Manual

16.33 VMS Cover

This function allows the user to switch use of voicemail coverage for their extension on or off.
When on, calls to the extension are redirected to the extension's mailbox when they ring unanswered for the extension's
VMS Coverage Rings setting. When off, calls to the extension continue to ring at the extension until answered or the
175
caller hangs up.
If the feature is programmed onto a button with LEDs/LCD, it will indicate when the feature is active.
·
If an extension already has a button set to this function, creating another button with this function will
automatically clear the setting from the existing button.
·
To access this function without a programmable button:
·
On DS and ETR phones, press FEATURE and then dial 15.
·
On BST phones, press FEATURE and dial 984.
1408/1416/9504/9508 Phone
1. Do one of the following depending on whether you want to change the button programming of the extension you
are using or that of another extension.
To program the same extension
a. At the extension, press Admin.
b. Use the up or down
scroll the display to Telephone
Programming. When highlighted, press
Select.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Press the button to edit. Alternatively using the
press Select. Enter from 03 to 99 or press the corresponding button.
3. Press Program and either dial #15 or use the
and press Select.
4. The button function is changed to VMS Cover.
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. Do one of the following depending on whether you want to change the button programming of the extension you
are using or that of another extension.
To program the same extension
a. Press Feature and dial *1 or
*2 or *3.
·
If the system has a system
password set, it is requested.
Enter the password.
2. To select the button, press the corresponding button. For buttons up to 99, you can also dial the button number.
The current setting of the selected button is displayed.
3. Dial Feature 984.
4. The button function is changed to VMS Cover.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
Phone Based Administration
IP Office Basic Edition
To program another extension
a. At either of the first two extensions on the system, press Admin.
arrow buttons to b. Use the
Centralized Programming. When highlighted, press Select.
c. At the Extension: prompt enter the extension that you want to
configure.
PHONE. Alternatively use the Back button to move to another menu.
To program another extension
a. At either of the first two extensions on the system, press
**user (ie. Feature **8737).
·
If the system has a
password.
b. At the Extension: prompt enter the extension number of the extension you
want to program.
Comments on this document? infodev@avaya.com
up or down arrow buttons to scroll the display to
PHONE button to display the Admin soft key
SPEAKER,
up or down arrows, scroll to Button Programming and
up or down arrow buttons to scroll the display to VMS Cover
system password
- Issue 6a (Thursday, February 22, 2018)
Button Programming: Station Unlock
MUTE and HEADSET
Feature
set, it is requested. Enter the
114
Page 289