Caller Id Name Display - Avaya IP Office Basic Edition Manual

16.12 Caller ID Name Display

This function allows the user to swap the display of caller ID name and number information on their extension.
On some phones, after the call is answered the call display is not able to show both the caller ID name and number. This
function allows the user on such phones to toggle between the name and the number.
·
If an extension already has a button set to this function, creating another button with this function will
automatically clear the setting from the existing button.
·
This function is only supported on a button that includes an LEDs/LCD. It will indicate when the function is on.
·
If the user has this feature enabled, removing this button will turn the feature off.
·
To access this function without a programmable button:
·
On DS and ETR phones, press FEATURE and dial 16.
·
On BST phones, press FEATURE and dial 933.
1408/1416/9504/9508 Phone
1. Do one of the following depending on whether you want to change the button programming of the extension you
are using or that of another extension.
To program the same extension
a. At the extension, press Admin.
b. Use the up or down
scroll the display to Telephone
Programming. When highlighted, press
Select.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Press the button to edit. Alternatively using the
press Select. Enter from 03 to 99 or press the corresponding button.
3. Press Program and either dial #16 or use the
Name Display and press Select.
4. The button function is changed to Caller ID Name Display.
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. Do one of the following depending on whether you want to change the button programming of the extension you
are using or that of another extension.
To program the same extension
a. Press Feature and dial *1 or
*2 or *3.
·
If the system has a system
password set, it is requested.
Enter the password.
2. To select the button, press the corresponding button. For buttons up to 99, you can also dial the button number.
The current setting of the selected button is displayed.
3. Dial Feature 933.
4. The button function is changed to Caller ID Name.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
Phone Based Administration
IP Office Basic Edition
To program another extension
a. At either of the first two extensions on the system, press Admin.
arrow buttons to b. Use the
Centralized Programming. When highlighted, press Select.
c. At the Extension: prompt enter the extension that you want to
configure.
PHONE. Alternatively use the Back button to move to another menu.
To program another extension
a. At either of the first two extensions on the system, press
**user (ie. Feature **8737).
·
If the system has a
password.
b. At the Extension: prompt enter the extension number of the extension you
want to program.
Comments on this document? infodev@avaya.com
up or down arrow buttons to scroll the display to
PHONE button to display the Admin soft key
SPEAKER,
up or down arrows, scroll to Button Programming and
up or down arrow buttons to scroll the display to Caller ID
system password
- Issue 6a (Thursday, February 22, 2018)
MUTE and HEADSET
Feature
set, it is requested. Enter the
114
Page 246